Welcome to the website. +86-13355457777
CNC turntable is an industrial mechanical device used to control the rotation of the workpiece in the machining process. So, is the CNC turntable driven? This article will explore this issue in depth.First of all, we need to understand the working principle of CNC turntable. CNC turntable is usually composed of two main parts: the turntable itself and the control system. The control system controls the operation of the turntable through signal transmission and computer programming. This means that the rotation of the CNC turntable is not driven by the traditional mechanical transmission system, but is controlled by the control system.However, although the rotation of the CNC turntable is not driven by the traditional mechanical transmission system, it still has the characteristics of transmission. Specifically, the rotation of the CNC turntable is driven by an electric motor, which is connected to the turntable by a transmission system. This transmission system is usually composed of gear, transmission belt and bearings and other components, their role is to transfer the power of the motor to the turntable, so as to achieve the rotation of the turntable.Therefore, although the rotation of the CNC turntable is not driven by the traditional mechanical transmission system, it still has the characteristics of transmission. The drive system acts as a bridge between the motor and the turntable, allowing the turntable to rotate according to the requirements of the control system.In short, CNC turntable is a kind of industrial machinery and equipment that controls rotation through a control system, and its rotation is realized through the transmission system. Therefore, although the CNC turntable is not a transmission in the traditional sense, it still has the characteristics of transmission.
Numerical control index plate is a commonly used machining equipment, it can realize the precise positioning and rotation of the workpiece, so as to achieve complex machining operations. When using CNC indexing plates, the following points need to be noted:1.1 Ensure device securityWhen using the CNC index plate, it is necessary to ensure the safety of the equipment. First of all, check whether the power supply and wires of the equipment are normal, and whether the various components of the equipment are firm. Secondly, pay attention to the use of the equipment environment, avoid the use of wet, high temperature or explosion risk places.1.2 Familiarize yourself with device operationsBefore using the CNC dial, it is necessary to be familiar with the operation method and use procedures of the equipment. Especially for beginners, it is necessary to carefully read the instructions of the equipment, understand the various components and functions of the equipment, and the matters that need attention when operating.1.3 Maintaining DevicesWhen using the CNC indexing dial, it is necessary to regularly maintain and maintain the equipment. Especially for some wearing parts, such as bearings, gears, etc., need to be regularly checked and replaced to ensure the normal operation and service life of the equipment.
where it is a professional factory engaged in the research, development, production, sales, and service of medium and large-sized high-end CNC turntables.